Weatherstop is the amazing new product for stopping gaps underneath your garage door. Cheap and easy to install and highly effective. Made from high quality thermoplastic, environmentally friendly and 100% re-cyclable.

                      * keeps the rain out...

                      * keeps the draughts out...

                      * keeps the leaves out...

                      * keeps the heat in...

 Garage door seal for gaps upto 15mm. WS01-

Industrial door seal for gaps upto 20mm. WS03-

Step 1.

Open your garage door and measure the overall width of the opening. Allow approximately 40mm (1½ inches) overhang to allow the floor seal to be notched back around each side of the door frame. Then cut the floor seal length to size. (sharp stanley knife recommended)

Step 2.

Mark with a pencil where the floor seal needs to be notched back. This will allow the floor seal to be positioned correctly behind the door and will create a good seal around the frame.

Step 3.

From inside the garage, with the door closed, push the floor seal up to the back of the door with the hump touching the door. Mark along the back edge of the floor seal with a pencil or suitable marker.

Step 4.

Step 5.

Using Fix All High Tack black sealant apply the sealant to the floor following the pencil lines created. Recommended application temperature +5°C to +35°C.

Step 6.

Starting from one side, place the floor seal on the sealant and press firmly downwards. Continue along the rest of the seal, ensuring good contact at all points. Remove any excess sealant from the sides with a cloth. Allow 24 hours before driving over the floor seal.

                           Fix All high tack black sealant (recommended)

       Sealant application gun.

       (both available in our online shop)